Flooring for underfloor heating in Smethwick and Warley. Laminate, vinyl and engineered wood chosen and fitted to work with the heating, not against it.
Underfloor heating is more common in Smethwick kitchen extensions and new-builds than it used to be, and not every floor suits it. The floor has to let the heat through, and it has to cope with warming and cooling every day without gaps opening or boards cupping. Makers publish a maximum surface temperature and a rule on how quickly the heating is brought up after fitting.
Before laying, the heating is usually run and then turned down so the screed is fully dry. The underlay is one that allows heat to pass.
The cost of fitting over underfloor heating in Smethwick depends on the floor chosen, the size of the room and whether the screed is ready. A new extension with fresh screed often needs more time before fitting. Photos, and whether the heating is water or electric, help us plan and price it.
Many ranges can, within the maker's temperature limit. We check yours before fitting.
For underfloor heating, yes. Its layered build moves far less than solid boards.
Usually it is turned down or off for fitting, then brought back up gradually over a few days.
Many vinyl ranges can, within the maker's temperature limit.
Thin floors let more heat through. Thick wood slows it down slightly.
The floor you choose, the size of the room and whether the screed is ready. A floor made for heated screeds is a safer choice than a cheaper one that is not. The fitting is quoted once we know the system.
The screed maker sets the drying time, and on a fresh extension it can be several weeks. The heating is brought up gently to dry it. We will not lay onto a screed that is still damp.
01Floor chosen for heat | Engineered wood, vinyl and laminate ranges made for underfloor heating, not solid wood. |
|---|---|
02Screed dried out | The heating commissioned and the screed dry before anything is laid. |
03Heat-friendly underlay | A thin underlay that lets the warmth through. |
04Warming up gently | Advice on bringing the heating back up slowly after the floor goes down. |
05Water or electric | Floors matched to wet systems in screed or electric mats under the floor. |
06Heat limits noted | The maximum floor temperature noted so the heating is set correctly. |
07Send these first | Photos of the room and of the heating manifold or thermostat if you can find it. Say whether the heating is water or electric. Tell us when the screed was laid, if it is a new extension. |
08How long to allow | The fitting itself is usually a day or two for a room. The wait before it is the longer part. The screed must be dry and the heating commissioned first. |
Send a photo or a quick video of the room on WhatsApp and we'll see if we can quote you over the phone, or fill in the form and it opens your email ready to send.
